Independent buyer of surplus transformers · Texas-wide pickup

High-voltage switchyard with transformers and buswork

Transformer Types

Sell Metal-Clad Switchgear for Cash in Texas

Sell surplus metal-clad switchgear with draw-out breakers. We assess ratings, compartments, test records and removal needs for offers based on unit inspection.

  • Direct buyer, not a broker
  • Texas-wide pickup
  • All voltage classes
Photo: Novoklimov / CC BY 4.0

ANSI metal-clad switchgear requires a more detailed review than a cabinet count and nominal voltage. Draw-out breaker compatibility, compartment segregation, bus condition and protective equipment determine what a retired lineup actually contains. Texas Electrical Transformer Buyers buys surplus and used metal-clad equipment for cash, including assemblies typically rated from 5 to 38 kV. If you manage an industrial substation, utility installation or large commercial plant, preserve the equipment's identification and configuration before crews begin disconnecting or separating the sections.

Working with a metal clad switchgear buyer starts with accurate assembly and breaker information, especially when spare breakers or replacement devices have been mixed into the lineup. Metal-clad construction uses grounded metal barriers to separate major compartments, but that construction does not by itself establish an arc-resistant rating. Describe the original design, any modifications and the reason for retirement. We develop unit-specific offers based on inspection, available records, component condition and the removal requirements associated with your particular installation.

01

What we buy

We consider ANSI metal-clad lineups with draw-out circuit breakers, segregated compartments and rear cable access, including incoming, feeder and bus-tie sections. Common manufacturer names include Siemens, Eaton, GE and Schneider Electric, but the lineup series and exact breaker design are essential to identification. Submit the assembly nameplate and individual breaker nameplates together. A breaker that fits physically into a compartment is not automatically an approved or electrically compatible replacement for the device originally specified.

Complete breaker cells, shutters, secondary disconnects, protective relays and instrument transformer arrangements help establish the usefulness of the assembly. We also review spare draw-out breakers and accessories when their relationship to the lineup is documented. Missing trucks, damaged barriers, altered racking components or removed cable-compartment doors must be identified. If the lineup was extended or retrofitted, include the relevant drawings and device lists so original sections and later changes can be evaluated without relying on visual similarity.

  • Typically 5 to 38 kV assemblies
  • Draw-out breakers and complete cells
  • Segregated bus and cable compartments
  • Documented spares and retrofit equipment
Typical metal-clad switchgear ratings
Typical capacityVoltage classCommon applications
5 kV to 38 kV1,200 A to 4,000 AIndustrial substations and utility service

Ranges are typical only. Send the nameplate for the actual ratings of your unit.

02

How we inspect and value

The evaluation begins with rated maximum voltage, continuous current, insulation level and the applicable short-circuit ratings of the assembly and breakers. We inspect primary disconnect contacts, insulating supports, shutters, racking mechanisms and compartment barriers. Mechanical wear or misalignment can impair operation even where the bus appears sound. Rear cable compartments deserve particular attention for termination damage, moisture intrusion and tracking. Evidence of an internal fault must be assessed across adjacent compartments rather than confined to the visibly damaged breaker cell.

For vacuum breakers, available timing, contact resistance and vacuum interrupter integrity records can help clarify condition when testing followed the manufacturer's procedures. Older air-magnetic designs require a different review, including arc chutes and their associated operating components. Relay records, insulation tests and maintenance documentation supplement the physical inspection. We weigh usable breakers, sound bus, intact segregation and verified configuration against missing components, repair needs and handling work. The offer is inspection-based; nominal voltage or copper content alone does not determine it.

  • Primary contacts and racking condition
  • Shutters, barriers and insulation integrity
  • Breaker-specific test and service records
  • Fault damage and restoration requirements
03

Documentation, interlocks and protection details

Provide the one-line diagram, section arrangement, breaker schedule and control schematics where available. Identify protective relay models, current transformer ratios and voltage transformer arrangements without assuming every feeder cell is identical. Relay settings can explain the former protection scheme, but they do not establish suitability for another installation. Label each breaker to its original cell and identify spare units separately. This is particularly important where a lineup contains multiple breaker ratings, control voltages or retrofit packages.

Report problems with test and connected positions, secondary plugs, charging motors, closing circuits or trip circuits. Interlocks should be assessed as part of the equipment's intended operating sequence, not bypassed to demonstrate movement. Disclose any defeated interlock, missing shutter linkage or modified compartment barrier. Also explain storage conditions and whether space heaters were maintained during an extended shutdown. Condensation, dust accumulation and deteriorated insulation can introduce concerns even when the assembly was operating normally at the time it was retired.

  • Cell-by-cell breaker identification
  • Control voltage and relay information
  • Interlock defects and modifications
  • Shutdown and storage conditions
04

Planning rear-access removal and shipping splits

Rear cable access can make disconnecting a metal-clad lineup more involved than its front appearance suggests. Qualified crews need room to reach terminations, identify all feeds and establish a verified safe electrical condition before beginning work. Include information about wall clearance, rear aisles, cable routing and any equipment blocking access. Stored spring energy and separate control supplies also require attention. Define responsibility for cable disconnection, grounding, breaker handling and separating sections before the lineup is scheduled for removal.

Keep grounded barriers, rear doors, bus splice hardware and inter-section wiring with their original sections. Use drawings and manufacturer handling guidance to locate shipping splits rather than cutting through the main bus. Draw-out breakers should be secured and handled with appropriate equipment; wheel assemblies do not make every floor route or loading method suitable. Send the section dimensions, known shipping weights and lifting provisions. An organized removal preserves identifiable components and allows the purchase evaluation to reflect the actual equipment offered.

  • Rear aisle and termination access
  • Verified isolation of every supply
  • Preserved barriers and bus splice kits
  • Breaker handling and shipping dimensions
FAQ

Common questions

Does metal-clad construction mean the switchgear is arc-resistant?

No. Metal-clad construction and arc-resistant performance are different classifications. Grounded metal barriers separating compartments do not, by themselves, establish an arc-resistant rating. Provide the manufacturer's nameplate and documentation for any claimed arc-resistant design, including applicable configuration requirements. We do not infer that rating from enclosure appearance, pressure flaps or a seller's general description.

Will you review an older lineup with air-magnetic breakers?

Yes, older air-magnetic equipment can be submitted for review with its assembly and breaker identification. Include photographs of the breakers, arc chutes, operating mechanisms and cells when safely accessible. Condition, completeness, documentation and removal requirements influence the assessment. We do not assume that an older breaker design has the same inspection requirements as a vacuum breaker.

Can spare breakers be included if their original cells are unknown?

Include them, but state that the original cell assignment is unknown. Photograph each breaker nameplate, primary disconnect arrangement, secondary connector and truck identification. Compatibility requires more than matching voltage and current ratings. Unverified spares are assessed separately until their relationship to the offered lineup can be established through manufacturer information or inspection.

What happens if one compartment has suffered a fault?

Disclose the event and provide incident reports, repair records and photographs if available. Fault damage can affect insulation, bus, barriers and neighboring compartments beyond the most visible failure location. We may consider the remaining equipment, but its condition needs independent evaluation. Do not describe unaffected sections as serviceable solely because their doors or exterior surfaces look undamaged.

Do I need every drawing before submitting metal-clad equipment?

No, you can begin with assembly nameplates, breaker nameplates, overall photographs and a section list. Drawings become especially valuable when the lineup has been extended, retrofitted or modified. Explain which documents are missing and identify known changes. Additional inspection may be required to establish configuration, compatibility and condition before an offer can be finalized.

Reviewed by the Texas Electrical Transformer Buyers buying desk · Last updated November 13, 2026

Your transformer has value. Let's put a number on it.

Call 614-715-3047 or send the nameplate. We buy the unit, coordinate the rigging and pay on agreed terms.

614-715-3047 Request an offer
Call 614-715-3047