Furnace transformers work under conditions that differ sharply from ordinary plant distribution service. Low secondary voltage, very high current and repeated thermal cycling place heavy demands on windings, connections and cooling systems. Units removed from steel mills, foundries and specialty metal plants need an equipment-specific assessment before their value can be established. Texas Electrical Transformer Buyers considers surplus and used furnace transformers, including equipment released through furnace replacement, production changes or the retirement of a complete melting system.
For a furnace transformer buyer, the electrical nameplate is only the beginning. Furnace type, secondary current, tap range, cooling arrangement and operating history help explain whether the equipment is complete and what inspection will require. Arc, induction and resistance furnace installations do not all use interchangeable transformer designs. We purchase equipment for cash with offers based on inspection of the individual unit. Clear records and an accurate removal scope are particularly important for these heavy, often highly customized assemblies.
What we buy
We evaluate transformers associated with arc, induction and resistance furnace systems, including liquid-filled and applicable dry-type designs. Provide rated kVA or MVA, primary voltage, secondary voltage range, phase configuration and frequency. Arc furnace equipment may have extensive tap ranges to accommodate changing process conditions. Resistance furnace units can use different output arrangements suited to their heating circuits. For induction equipment, identify whether the transformer supplies a power converter or serves another part of the installation; its frequency must not be assumed.
Nameplates may carry manufacturers such as ABB, Siemens or other suppliers of industrial furnace equipment. Brand recognition does not resolve the details of a custom furnace design, so original drawings and connection schedules are valuable. Identify included tap changers, reactors, coolers, pumps, control cabinets and secondary connection hardware. Associated equipment should be listed separately rather than treated as automatically included. We assess complete assemblies and individual transformers, with condition and documentation determining how each proposed sale is evaluated.
- Arc furnace transformer assemblies
- Induction-system supply transformers
- Resistance furnace power transformers
- Documented cooling and control components
| Typical capacity | Voltage class | Common applications |
|---|---|---|
| 1 to 100 MVA | 0.2 kV to 35 kV | Arc and induction furnace duty |
Ranges are typical only. Send the nameplate for the actual ratings of your unit.
How we inspect and value
Inspection focuses on winding condition, insulation integrity and the high-current connections that carry the secondary output. We look for overheated joints, damaged bushings, leaking seals, tank distortion and signs of cooling failure. Repeated short-circuit forces can stress winding supports and connections, particularly in demanding arc furnace service. Available winding resistance, ratio and insulation test records help guide the assessment. For liquid-filled units, oil analysis and dissolved gas analysis may provide additional evidence, but results require qualified interpretation and operating context.
Value also depends on the electrical range, usable accessories, physical completeness and the practicality of removal. Copper content matters, yet a reusable assembly is not evaluated solely by its estimated metal weight. Water-cooled equipment requires attention to cooler condition and possible cross-contamination between water and insulating fluid. We review fluid identification, available PCB records, maintenance history and known defects. Each cash offer is based on inspection of the specific equipment and considers both technical condition and the actual handling requirements.
- Secondary joints and terminal condition
- Winding and insulation test history
- Fluid quality and cooler integrity
- Completeness and removal complexity
Cyclic duty, cooling and failure history
Explain the furnace operating pattern, including repeated heat cycles, shutdown periods and any sustained operation near the transformer's limits. Arc furnace service can involve substantial current fluctuations and short-circuit events during melting. Those conditions affect thermal aging and mechanical stress differently from a steady industrial load. Tap-changer service history is particularly useful where frequent adjustments were part of normal operation. Report contact repairs, abnormal switching behavior and any restrictions placed on the equipment before it was taken out of service.
Cooling details should include the installed arrangement, the components still present and any history of reduced flow, fouling or leakage. Not every furnace transformer is water-cooled, and some use oil circuits with separate heat exchangers. Water entry into an insulating-fluid system can compromise dielectric performance and must be disclosed. Secondary connections may also show localized damage from high resistance at joints. Photographs of discolored terminals, repaired connections and cooler piping help identify concerns that an overall equipment photograph may not reveal.
- Heat cycles and operating limits
- Tap-changer repairs and restrictions
- Cooling flow and leakage history
- High-current joint damage or repairs
Heavy-equipment removal and documentation
Document the assembly while it remains installed, especially secondary terminal arrangements, cooling connections and accessory wiring. Qualified personnel must isolate electrical supplies and address stored energy in associated equipment before dismantling begins. Cooling circuits also require controlled shutdown and appropriate fluid handling. High-current buswork can be heavy and mechanically stressed, so its removal needs a planned sequence. Do not cut off identifying terminals or discard connection hardware before the sale scope and the equipment's intended disposition have been established.
Supply lifting drawings if available, approximate shipping dimensions, verified or documented weight, and a description of the route from the operating position to the loading area. State whether coolers, conservators or other components must be removed for transport. Tank lifting points and jacking provisions should be assessed by qualified rigging personnel rather than assumed from appearance. Include nameplates, general arrangement drawings, electrical test reports and fluid records. A defined boundary between transformer purchase and removal work prevents avoidable uncertainty during evaluation.
- Record secondary and cooling connections
- Define dismantling and fluid-handling scope
- Provide lifting and arrangement drawings
- Identify transport dimensions and access
Common questions
Can I sell a furnace transformer after the furnace has been dismantled?
Yes, we can review the remaining transformer, but identify what was removed with the furnace. Secondary buswork, cooling equipment, controls and tap-changer components can affect completeness. Send photographs of the remaining terminals and accessories, along with any original drawings. Explain how the transformer was disconnected and stored so we can evaluate condition and handling requirements.
What information matters most on a furnace transformer nameplate?
Useful details include kVA or MVA, primary voltage, secondary voltage range, rated secondary current, phase arrangement, frequency and cooling designation. Tap information and impedance data are also relevant when available. Because furnace transformers are often application-specific, include the furnace type and original drawings rather than expecting the capacity rating alone to describe the equipment.
Will you consider a unit with a leaking water cooler?
We can assess it if the defect is clearly disclosed. State whether the leak is external or whether water may have entered the insulating fluid. Provide cooler photographs, repair history and existing fluid test results. A compromised cooler changes the inspection requirements and may affect the unit's disposition; it should not be represented as a minor issue without supporting evidence.
Are arc and induction furnace transformers interchangeable?
Generally, they should not be treated as interchangeable. Arc furnace transformers are designed around their furnace voltage range, high-current duty and operating stresses. Induction installations may use a transformer ahead of a converter, with ratings tied to that system. Frequency, connections, impedance and cooling must be checked against the actual design before any compatibility conclusion is made.
Should I drain the insulating fluid before offering the transformer?
Do not drain it solely to prepare a sales inquiry. First document the fluid type, quantity if known, leaks and available test or PCB records. Fluid removal can change storage, handling and inspection conditions and requires appropriate procedures. Tell us whether the unit is currently filled, partially drained or empty so the equipment and removal scope can be evaluated accurately.
Reviewed by the Texas Electrical Transformer Buyers buying desk · Last updated November 13, 2026