Surplus switches from a feeder rebuild need accurate identification before they can be evaluated as reusable equipment. Texas Electrical Transformer Buyers purchases used and surplus overhead and underground switching equipment, including load-break switches, disconnect switches and fault interrupters. As a load break switch buyer, we look at the device's actual electrical duty, condition and included hardware. A lot described only as distribution switches leaves important questions about ratings, operating systems and completeness unanswered.
Some devices are designed to interrupt normal load current, while others provide isolation only or have rated fault-interrupting capability. Those differences matter when you prepare equipment for sale. Send nameplates, model numbers and photographs that show the complete switching assembly. For multiple units, identify the quantity of each model and separate unused stock from removed equipment. We assess each device or documented lot on its own merits, with offers based on inspection rather than an assumed per-switch figure.
What we buy
We review overhead and underground load-break switches, disconnect assemblies and fault interrupters used to sectionalize distribution circuits. Identify whether each unit is single-pole or gang-operated, manually operated or motor-operated, and intended for overhead mounting or underground service. Provide voltage class, continuous current and the applicable switching and short-circuit ratings. A fault-making rating does not mean the device can interrupt fault current. Likewise, a plain disconnect must not be represented as a load-break switch unless its marked ratings and construction support that duty.
S&C, Hubbell and G&W Electric are common manufacturer names in distribution switching equipment, but purchase evaluation depends on the specific model and configuration. Complete assemblies may include interrupter attachments, operating rods, motor operators, controls, mounting brackets and insulating supports. Identify what actually accompanies each unit rather than relying on a catalog photograph. We also review surplus lots from feeder rebuilds, provided model groups and condition differences are documented. Mixed equipment should be sorted by identification before it is counted as one uniform lot.
- Overhead and underground switching devices
- Single-pole and gang-operated assemblies
- Manual and motor-operated units
- Documented feeder-rebuild surplus lots
| Typical capacity | Voltage class | Common applications |
|---|---|---|
| 15 kV to 38 kV | 600 A to 900 A | Overhead and underground sectionalizing |
Ranges are typical only. Send the nameplate for the actual ratings of your unit.
How we inspect and value
Inspection focuses on current-carrying contacts, insulating components, interrupting elements and the operating mechanism. We look for excessive contact erosion, pitting, overheating, cracked insulators, contamination and damaged terminals. On gang-operated equipment, linkage condition and pole alignment matter because uneven motion can prevent correct operation. Interrupting attachments must be identified and assessed separately from the visible disconnect blades. A blade that opens smoothly does not prove the device can safely interrupt its rated load or that all required interrupter components remain installed.
Completeness and remaining condition drive the offer alongside ratings and the potential for reuse. Missing operators, mounting hardware or control components can materially change how an assembly is evaluated. For sealed devices, provide available pressure or status indications, leak records and manufacturer service information without disturbing the enclosure. Motor-operated equipment needs documentation of the operator and control supply, not just the switch rating. We make unit-specific offers based on inspection and account for defects, uncertain identification, necessary repairs and practical handling requirements.
- Contact wear and heat damage
- Insulator and interrupter condition
- Linkage alignment and operator completeness
- Ratings, repairs and handling needs
Distinguishing switching duties and failure modes
Tell us whether the device was removed during a planned feeder rebuild, after a fault or because it would no longer operate reliably. Relevant issues include welded or burned contacts, broken insulating supports, seized bearings and damaged arc-control components. Overhead equipment can also arrive with bent brackets or linkage damage from removal rather than service. Separate those conditions in your description when they are known. Unused equipment still requires review if outdoor storage, missing packaging or corrosion has affected its condition.
Fault interrupters need their own configuration details because interrupting capability may depend on integral sensing, controls or a specified operating arrangement. Include the model of any associated control and disclose missing cables or accessories. Do not assume a control from a different device is interchangeable. For switches with load-break attachments, identify whether the attachment remains present and whether its condition is known. Report any bypassed interlocks, improvised linkage repairs or unauthorized modifications instead of presenting the assembly as an unchanged factory unit.
- Removal reason and service defects
- Arc-control component identification
- Associated controls and sensing equipment
- Storage damage and field modifications
Preparing switch lots for removal and sale
Electrical isolation must be established by qualified personnel before any distribution switch is removed. An open blade or visible position indicator alone does not establish safe working conditions. Follow the approved switching, lockout/tagout and grounding procedures for the circuit, including possible alternate sources. Do not cycle a connected switch to create a sale video. For pole-mounted equipment, the removal plan must also address mechanical support, rigging and preservation of fragile insulating parts. Our buying assessment does not replace those site responsibilities.
Build a lot list showing manufacturer, model, ratings, quantity and condition category. Photograph a representative complete unit from each group, then separately document exceptions and damage. Keep matching rods, operators, controls and mounting pieces identified with their assemblies. Pack devices so contacts and insulators are protected rather than bearing the weight of stacked equipment. Include approximate dimensions, known weights and loading access. This information lets us review what you own without assuming every switch in a pallet or yard pile is identical.
- Model-by-model quantity list
- Separated condition categories
- Matched operators and mounting hardware
- Protected contacts and insulators
Common questions
Do you buy plain disconnect switches as well as load-break switches?
We review both, but they must be identified correctly. A disconnect intended for isolation may not be rated to interrupt load current. Send the device nameplate, manufacturer model and photographs of any interrupter attachments. We assess its documented duty rather than assume that every switch with an opening blade has load-break capability.
Can I sell a mixed lot from a feeder rebuild?
Yes, submit a breakdown by manufacturer, model, quantity and condition. Separate unused surplus from equipment removed after service, and identify units with missing operators or damaged insulators. Representative photographs help with grouped equipment, but show exceptions individually. A mixed lot is evaluated according to its actual contents rather than treated as a collection of identical devices.
What ratings distinguish a fault interrupter from a load-break switch?
A load-break rating addresses interruption of specified load current, while a fault-interrupting rating addresses clearing fault current under stated conditions. Short-time withstand and fault-making ratings describe other duties and are not substitutes for interrupting capability. Supply the complete nameplate and associated control information so the device can be evaluated using its documented ratings.
Are switches with broken insulators worth submitting?
You may submit them for review, but show the damage clearly and identify affected phases or support points. Broken insulation can compromise electrical clearances and mechanical stability, and replacement availability may affect potential reuse. Do not conceal cracks with paint or temporary repairs. We assess damaged equipment as presented, without assuming it can be restored economically.
Should operating rods and controls stay with the switches?
Keep matching accessories with each assembly whenever they are included in the sale. Identify rods, motor operators, control cabinets, cables and brackets by the switch they served. Missing or mixed accessories can make configuration uncertain and affect an offer. Photograph their labels and disclose known defects; do not assume similar-looking operators or controls are compatible.
Reviewed by the Texas Electrical Transformer Buyers buying desk · Last updated November 13, 2026